Must have working brakes

If four wheel drive wants to run two-wheel class, drive shaft must be removed.

Roll Bar needs to be 6" from Driver's Head. THIS WILL BE ENFORCED

Roll Cage: 3 or 4 point roll bar of 2" or larger pipe bolted or welded with plates to floor. NO GALVANIZED PIPE ALLOWED.

Vehicle must have Driver's door bar mounted horizontally across the middle of the door extending at least 6" past the A pillar and at least 6" past the B pillar. Door bars must be at a minimum of 1/4" thick. No sharp ends. (NO FENCE POSTS WILL BE ALLOWED)

Bar must have a minimum of two 5/8" diameter bolts mounted through the door and bar with at least a 2" diameter washer on both the bolt head side and the nut side and a minimum of a 1" weld every 12".

Stock Bumpers, no I-BEAMS

Driver's window must be covered with an approved car netting to keep all body parts inside of car in case of rollover

Battery: Stock or safely relocated and secured

Gas Tank: Stock or safely relocated and secured

ALL EXTERIOR LIGHTS, CHROME, SIDE GLASS, AND REAR WINDOW MUST BE REMOVED!!! Front Windshield is optional.

If windshield is removed, there must be heavy duty wire mesh or bars in place to stop debris from coming in, in front of driver.

Tires: Stock or approved for highway use

Air Bags removed

Sunroof: Plugged or covered

Drivers must wear a helmet with a face shield and have a seatbelt with a shoulder harness

No passengers allowed

Number plate to be mounted on the roof

Any un-sportsman like conduct by driver or pit crew will result in immediate removal from event with no refunds.

These rules are for your safety, not our enjoyment!